How to use shutter speed effectively in DSLR photography?

Shutter speed is the duration of light falling on the digital image sensor. It is the time for which light stays on the image sensor to make a perfect exposure. It is controlled by a mechanism housed in the camera body closer to the focal plane (image sensor).

The role of shutter speed in photography is very important and can produce interesting effects that human eye cannot see. The very meaning or understanding of a photo can be changed by varying the shutter speed.

Mohan S.V.jpg

Fast shutter speeds like 1/125, 1/250, 1/500, 1/1000 and above will let the exposure very brief and slow shutter speeds like 1/30, 1/15, 1/8 and below will let the exposure long.

Total flash photography needs a shutter speed 1/200 (flash sync speed) or below for most of the cameras. There is no impact of flash exposure by changing the shutter speeds when there is not enough ambient light.

Jerome Desilva (26)

Shutter speeds higher than the reciprocal of the focal length of the lens used will guarantee images without camera shake when a tripod is not used – A 400mm lens needs atleast 1/400 shutter speed and a 18mm lens needs just 1/20 shutter speed to avoid camera shake.

DSC_0161

Fast shutter speeds can assure crispy and sharp images without camera shake and apparent subject motion effects.

Madeep 2014 (2)c

Fast shutter speeds like 1/125, 1/250, 1/500, 1/1000 and above are used to arrest the fast motion – faster shutter speeds can capture fast actions we missed to see. Use highest possible shutter speeds for shooting sports, birds in flight, wild life action – shutter speed higher than 1/500 is a good choice.

SUB_0001c

Slow shutter speeds like 1/15,1/8,1/4 and bellow are used to record movements as a blur – some of these blurring effects  like panning and zoom burst are unique that human eyes cannot see .

Sendil Selvam (10)

Long exposures like 1sec, 2secs, 4secs, 8secs and longer can produce beautiful light streaks – something we cannot see with our eyes. Use of a tripod is a must for such shots.

_MG_9825c

Bulb shutter denoted by ‘B’ is a longer than the 30secs preset shutter speeds available, is something used for very low light shots, fire works, lightning, light painting and abstract images. Use of a tripod is a must for such shots.

Mandeep 2014 (1)

If you found this article usefull, please check our Basic DSLR Photography weekend course , where we explore all the essentials of Digital SLR photography in detail. It is an intensive, 10 weekend (60 hours) course 

Advertisements

How to avoid camera blur on subject?

Camera shake or camera blur is a crucial problem while shooting in slow shutter speeds and it is a major issue with the beginners. It is the feel of visual jerk or vibration seen in a photo. A point and shoot instinct without understanding the effect of slow shutter speeds results in camera blur. The image looks unclear, without sharpness and the out line of the subject is not well-defined when there is a camera shake.

This is a big challenge if you are a nature/wild life/sports/macro photographer using long focal length lenses. Lenses with built-in tripod collars (70-200mm, 100-400mm) are supposed to be used on a tripod especially you are shooting in the available light.

The following tips will help us get rid of unwanted camera shake resulting in blurry pictures.

IMG_0238r

  1. Use faster shutter speeds possible in a given situation.
  2. Try increasing the ISO sensitivity or larger apertures instead of reducing the shutter speeds in low light conditions when you are not using a tripod.
  3. Choose a shutter speed higher than the reciprocal of focal length of the lens while shooting the camera hand-held. For example, use 1/60 while shooting at 50mm and 1/125 while shooting at 105mm. This does not matter when your camera is on a solid tripod.
  4. Use fast lenses (lenses with wider maximum apertures viz.f/2.8,f/1.4,f/1.2 etc.). Fast lenses will give you scopes to use fast shutter speeds.
  5. Activate IS or VR image stabilization technology of your camera/lens for shooting below the reciprocal principle as mentioned in point 3. This may let you shoot at least two stops lower than the reciprocal principle._MG_0026r
  6. Use sturdy tripods to hold on the weight of your camera plus lens and other accessories perfectly and confirm the camera is not shaking during the exposure.
  7. If you do not have a sturdy tripod, you can try holding the camera firmly by leaning on to a stable support or you can even use a sand bag and set your camera on it.
  8. For very slow shutter speeds and long exposures do not press the shutter release directly with your fingers; instead use the remote shutter release or self timer release.
  9. When shooting in live view mode (both still images and video) hand-held camera operations, use the camera strap on your neck and stretch in front tight to hold the camera steady.
  10. Check your image at 100% magnification level to identify the camera shake. The LCD on the back of your camera cannot give you a clue about camera blur in its normal display.

IMG_0261r

If you found this article useful, please check our Basic DSLR Photography weekend course , where we explore all the essentials of Digital SLR photography in detail. It is an intensive, 10 weekend (60 hours) course.